top of page

Data Center Containment

rohs compliant_edited.png

The aisle containment system is a modular row based thermal containment solution, which separates cold and hot data center air streams to and from equipment. It manages airflow at the source, increases the cooling efficiency and significantly lowers down operating costs.


Provide the right combination of safety and security, dual mechanical doors or sliding doors are available.


Aisle containment in the data center requires that cabinets are aligned in a hot aisle/cold aisle layout. Containment panels or strips create a partition to isolate either the server supply air (cold aisle containment) or the exhaust air (hot aisle containment). Preventing the supply and exhaust air from mixing significantly increases the capacity and cooling efficiency of the cooling infrastructure.


Each site will be different due to the site conditions, cooling infrastructure, rack density and other factors. If properly installed you can expect 20-50% reduction in cooling costs. Efficiency is maximized if the cooling systems with variable speed fans and there is a good return air path.


Containment in a data center refers to the practice of segregating the cold intake air from the hot exhaust air. This separation ensures that equipment is cooled more efficiently, leading to reduced energy costs and increased equipment lifespan.


Cooling System : This is an integral part of the containment strategy. The main objectives are:


Temperature Control : Ensures that the data center operates within optimal temperature ranges. Too hot, and equipment can fail or get damaged; too cold, and you're wasting energy.


Humidity Control : Maintains the right level of humidity. Too much can cause condensation and equipment damage, while too little can cause static electricity.


Air Flow Management : Efficiently directs cool air to where it's needed and removes hot air.


Redundancy : In case one cooling system fails, a backup is ready to take over to ensure continuous cooling.





Under normal operation time, the roof panels are in a horizontal position, in case there is a fire alarm, Roof panel’s lock will be unlock, panel will open due to it’s gravity to make sure the extinguish gas can enter into the cold aisle containment.


The roof panels are made from steel frame and polycarbonate glass, the thickness of steel frame is more than 1.5mm, thickness of polycarbonate glass is 5mm.



All the panels has depth size 600mm or 800mm base on width of server rack, each unit can be installed independently and connected to the next one. All the panels has width 1400mm or 2000mm base on width of door.


The roof 600mm panels can be installed up to 10 panels and the roof 800mm panels can be installed up to 7 panels.


The roof panels are completed with lamp for lighting area. The lamp will light up when motion detected by motion sensor device.

ROOF PANEL OPENED


bottom of page